|
ASX-1000/10AC |
ASX-1000 10 Gbps Backbone ATM Switch; base configuration includes 10 Gbps ATM switching fabric, 16 netmod slots, one AC power supply, common equipment card, and four 266 MHz switch control processors (16 MB flash, 256 MB DRAM) |
|
ASX-1000/10DC |
ASX-1000 10 Gbps Backbone ATM Switch; base configuration includes 10 Gbps ATM switching fabric, 16 netmod slots, redundant DC power supplies, common equipment card, and four 266 MHz switch control processors (16 MB flash, 256 MB DRAM) |
|
ASX-1000/2.5AC |
ASX-1000 2.5 Gbps Backbone ATM Switch; base configuration includes 2.5 Gbps ATM switching fabric, 4 netmod slots, one AC power supply, common equipment card, and a 266 MHz switch control processor (16 MB flash, 256 MB DRAM) |
|
ASX-1000/2.5DC |
ASX-1000 2.5 Gbps Backbone ATM Switch; base configuration includes 2.5 Gbps ATM switching fabric, 4 netmod slots, redundant DC power supplies, common equipment card, and a 266 MHz switch control processor (16 MB flash, 256 MB DRAM) |
|
ASX-1000/5AC |
ASX-1000 5 Gbps Backbone ATM Switch; base configuration includes 5 Gbps ATM switching fabric, 8 netmod slots, one AC power supply, common equipment card, and two 266 MHz switch control processors (16 MB flash, 256 MB DRAM) |
|
ASX-1000/5DC |
ASX-1000 5 Gbps Backbone ATM Switch; base configuration includes 5 Gbps ATM switching fabric, 8 netmod slots, redundant DC power supplies, common equipment card, and two 266 MHz switch control processors (16 MB flash, 256 MB DRAM) |
|
ASX-1000/7.5AC |
ASX-1000 7.5 Gbps Backbone ATM Switch; base configuration includes 7.5 Gbps ATM switching fabric, 12 netmod slots, one AC power supply, common equipment card, and three 266 MHz switch control processors (16 MB flash, 256 MB DRAM) |
|
ASX-1000/7.5DC |
ASX-1000 7.5 Gbps Backbone ATM Switch; base configuration includes 7.5 Gbps ATM switching fabric, 12 netmod slots, redundant DC power supplies, common equipment card, and three 266 MHz switch control processors (16 MB flash, 256 MB DRAM) |
|
ASX-1200/10AC |
ASX-1200 10 Gbps Backbone ATM Switch; base configuration includes 10 Gbps ATM switching fabric, 16 netmod slots, one AC power supply, common equipment card, and a 400 MHz switch control processor (32 MB flash, 256 MB DRAM) |
|
ASX-1200/10DC |
ASX-1200 10 Gbps Backbone ATM Switch; base configuration includes 10 Gbps ATM switching fabric, 16 netmod slots, one AC power supply, common equipment card, and four 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
ASX-1200/2.5AC |
ASX-1200 10 Gbps Backbone ATM Switch; base configuration includes 10 Gbps ATM switching fabric, 16 netmod slots, redundant DC power supplies, common equipment card, and four 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
ASX-1200/2.5DC |
ASX-1200 2.5 Gbps Backbone ATM Switch; base configuration includes 2.5 Gbps ATM switching fabric, 4 netmod slots, redundant DC power supplies, common equipment card, and a 400 MHz switch control processor (32 MB flash, 256 MB DRAM) |
|
ASX-1200/5AC |
ASX-1200 5 Gbps Backbone ATM Switch; base configuration includes 5 Gbps ATM switching fabric, 8 netmod slots, one AC power supply, common equipment card, and two 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
ASX-1200/5DC |
ASX-1200 5 Gbps Backbone ATM Switch; base configuration includes 5 Gbps ATM switching fabric, 8 netmod slots, redundant DC power supplies, common equipment card, and two 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
ASX-1200/7.5AC |
ASX-1200 7.5 Gbps Backbone ATM Switch; base configuration includes 7.5 Gbps ATM switching fabric, 12 netmod slots, one AC power supply, common equipment card, and three 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
ASX-1200/7.5DC |
ASX-1200 7.5 Gbps Backbone ATM Switch; base configuration includes 7.5 Gbps ATM switching fabric, 12 netmod slots, redundant DC power supplies, common equipment card, and three 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
ASX-200BX/AC |
ASX-200BX 2.5 Backbone ATM Switch; base configuration includes one 2.5 Gbps ATM Switch fabric, four netmod slots, redundant AC power supplies, and a 400 MHz Pentium switch control processor (32 MB flash, 256 MB DRAM). |
|
ASX-200BX/DC |
ASX-200BX 2.5 Backbone ATM Switch; base configuration includes one 2.5 Gbps ATM Switch fabric, four netmod slots, redundant DC power supplies, and a 400 MHz Pentium switch control processor (32 MB flash, 256 MB DRAM). |
|
CEC-PLUS/3D-I |
Stratum 3 Redundant CEC-Plus; must choose DS-1 or E1 timing (ASX-1200 factory installed option) |
|
CEC-PLUS/3S-I |
Stratum 3 Simplex CEC-Plus; must choose DS1 or E1 timing (ASX-1200 factory installed option) |
|
CEC-PLUS/4D-I |
Stratum 4 Redundant CEC-Plus; must choose DS-1 or E1 timing (ASX-1200 factory installed option) |
|
CEC-PLUS/4S-I |
Stratum 4 Simplex CEC-Plus; must choose DS-1 or E1 timing (ASX-1200 factory installed option) |
|
PS-1000AC-R |
Redundant Installed AC Power Supply for ASX-1000 and ASX-1200, for AC Base Configurations only |
|
SCP-P5-200-HM-I |
Pentium SCP - 200 MHz, 256 MB DRAM (installed in place of a 200 MHz Pentium Processor w/ 64 MB DRAM). Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed option) |
|
SCP-P5-200-HM-R |
Redundant Pentium 200 MHz SCP - 256 MB DRAM (200 MHz Pentium SCP installed in redundant configuration); must be same type as primary SCP (256 MB DRAM) in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed option) |
|
SCP-P5-200-I |
Pentium SCP - 200 MHz, 64 MB DRAM (installed in place of a 266 MHz Pentium Processor) Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX1200 factory installed option) |
|
SCP-P5-200-R |
Redundant Pentium 200 MHz SCP - 64 MB DRAM 200 MHz Pentium SCP installed in redundant configuration); must be same type as primary SCP in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed option) |
|
SCP-P5-266-HM-I |
Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash (installed in place of a 200 MHz Pentium Processor w/ 64 MB DRAM). Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000 factory installed upgrade) |
|
SCP-P5-266-1200-HM-I |
Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash (installed in place of a 266 MHz Pentium Processor w/ 64 MB DRAM). Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX1200 factory installed upgrade) |
|
SCP-P5-266-HM-R |
Redundant Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash (266 MHz Pentium SCP installed in redundant configuration); must be same type as primary SCP (256 MB DRAM) in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX1000 factory installed upgrade) |
|
SCP-P5-266-I |
Pentium 266 MHz Switch Control Processor with 64 MB DRAM and 16 MB flash (64 MB Pentium Switch Control Processor installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000 factory installed upgrade) |
|
SCP-P5-266-R |
Pentium 266 MHz Switch Control Processor with 64 MB DRAM and 16 MB flash (64 MB Pentium Switch Control Processor installed in redundant configuration); must be same type as primary SCP in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed option) |
|
SCP-P5-400-ASX1000-I |
Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 8.3 or greater software, or software patch to FT7.0.1, 7.1, 8.0, 8.1 or 8.2 ASX1000 factory installed upgrade) |
|
SCP-P5-400-HM-ASX1000-I |
Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 8.3 or greater software, or software patch to FT7.0.1, 7.1, , 8.0, 8.1 or 8.2 ASX1000 factory installed upgrade) |
|
SCP-P5-400-ASX12-I |
Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 266 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX1200 factory installed upgrade) |
|
SCP-P5-400-ASX12-HM-I |
Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 266 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX1200 factory installed upgrade) |
|
SCP-P5-400-BX-I |
Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 ASX200BX factory installed upgrade) |
|
SCP-P5-400-HM-BX-I |
Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 ASX200BX factory installed upgrade) |
|
SCP-P5-400-R |
Redundant Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash, (400 MHz Pentium SCP installed in redundant configuration)*; must be same type as primary SCP in switch module. *Requires ForeThought 8.0 or greater software, or software patch to FT7.0.1, 7.1 |
|
SCP-P5-400-HM-R |
Redundant Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash, (400 MHz Pentium SCP installed in redundant configuration)*; must be same type as primary SCP in switch module. *Requires ForeThought 8.0 or greater software, or software patch to FT7.0.1, 7.1 |
|
TNX-1100/10AC-3 |
TNX-1100 10 Gbps switch; base configuration includes 10 Gbps switching fabric, 16 netmod slots, redundant AC power supplies, Stratum 3 CEC-Plus (must choose DS1 or E1 timing), and four redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/10AC-4 |
TNX-1100 10 Gbps switch; base configuration includes 10 Gbps switching fabric, 16 netmod slots, redundant AC power supplies, Stratum 4 CEC-Plus (must choose DS1 or E1 timing), and four redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/10DC-3 |
TNX-1100 10 Gbps switch; base configuration includes 10 Gbps switching fabric, 16 netmod slots, redundant DC power supplies, Stratum 3 CEC-Plus (must choose DS1 or E1 timing), and four redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/10DC-4 |
TNX-1100 10 Gbps switch; base configuration includes 10 Gbps switching fabric, 16 netmod slots, redundant DC power supplies, Stratum 4 CEC-Plus (must choose DS1 or E1 timing), and four redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/2.5AC-3 |
TNX-1100 2.5 Gbps switch; base configuration includes 2.5 Gbps switching fabric, 4 netmod slots, redundant AC power supplies, Stratum 3 CEC-Plus (must choose DS1 or E1 timing), and redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/2.5AC-4 |
TNX-1100 2.5 Gbps switch; base configuration includes 2.5 Gbps switching fabric, 4 netmod slots, redundant AC power supplies, Stratum 4 CEC-Plus (must choose DS1 or E1 timing), and redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/2.5DC-3 |
TNX-1100 2.5 Gbps switch; base configuration includes 2.5 Gbps switching fabric, 4 netmod slots, redundant DC power supplies, Stratum 3 CEC-Plus (must choose DS1 or E1 timing), and redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/2.5DC-4 |
TNX-1100 2.5 Gbps switch; base configuration includes 2.5 Gbps switching fabric, 4 netmod slots, redundant DC power supplies, Stratum 4 CEC-Plus (must choose DS1 or E1 timing), and redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/5AC-3 |
TNX-1100 5 Gbps switch; base configuration includes 5 Gbps switching fabric, 8 netmod slots, redundant AC power supplies, Stratum 3 CEC-Plus (must choose DS1 or E1 timing), and two redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/5AC-4 |
TNX-1100 5 Gbps switch; base configuration includes 5 Gbps switching fabric, 8 netmod slots, redundant AC power supplies, Stratum 4 CEC-Plus (must choose DS1 or E1 timing), and two redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/5DC-3 |
TNX-1100 5 Gbps switch; base configuration includes 5 Gbps switching fabric, 8 netmod slots, redundant DC power supplies, Stratum 3 CEC-Plus (must choose DS1 or E1 timing), and two redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/5DC-4 |
TNX-1100 5 Gbps switch; base configuration includes 5 Gbps switching fabric, 8 netmod slots, redundant DC power supplies, Stratum 4 CEC-Plus (must choose DS1 or E1 timing), and two redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/7.5AC-3 |
TNX-1100 7.5 Gbps switch; base configuration includes 7.5 Gbps switching fabric, 12 netmod slots, redundant AC power supplies, Stratum 3 CEC-Plus (must choose DS1 or E1 timing), and three redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/7.5AC-4 |
TNX-1100 7.5 Gbps switch; base configuration includes 7.5 Gbps switching fabric, 12 netmod slots, redundant AC power supplies, Stratum 4 CEC-Plus (must choose DS1 or E1 timing), and three redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/7.5DC-3 |
TNX-1100 7.5 Gbps switch; base configuration includes 7.5 Gbps switching fabric, 12 netmod slots, redundant DC power supplies, Stratum 3 CEC-Plus (must choose DS1 or E1 timing), and three redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-1100/7.5DC-4 |
TNX-1100 7.5 Gbps switch; base configuration includes 7.5 Gbps switching fabric, 12 netmod slots, redundant DC power supplies, Stratum 4 CEC-Plus (must choose DS1 or E1 timing), and three redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-210/AC |
TNX-210/AC Base Configuration includes 2.5 Gbps switch fabric, 4 netmod slots, redundant AC power supplies, and redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
TNX-210/DC |
TNX-210/DC Base Configuration includes 2.5 Gbps switch fabric, 4 netmod slots, redundant DC power supplies, and redundant 400 MHz switch control processors (32 MB flash, 256 MB DRAM) |
|
SCP-TNX-HMUPG-I |
TNX SCP memory upgrade from redundant SCP-P5-400 to redundant SCP-P5-400-HM (upgrade memory from 256 MB to 512 MB on redundant SCP-P5-400) |
|
SCP-P5-266-HM-700-I |
SCP Upgrade: Replace SCP-P5-266-HM, (16 M flash 256 MB RAM) with 700 MHz, 64 M flash and 512 MB RAM SCP-P5-700; *Requires ForeThought 9.1 or greater software |
|
SCP-P5-400-700-I |
SCP Upgrade: Replace SCP-P5-400 (32 M flash 256 MB RAM) with 700 MHz, 64 M flash and 512 MB RAM SCP-P5-700; *Requires ForeThought 9.1 or greater software |
|
SCP-P5-400-HM-700-I |
SCP Upgrade: Replace SCP-P5-400-HM(32 M flash 512 MB RAM) with 700 MHz, 64 M flash and 512 MB RAM SCP-P5-700; *Requires ForeThought 9.1 |
|
SCP-TNX-P5-400-700-I |
SCP Upgrade: Replace redundant SCP-P5-400 (32 M flash 256 MB RAM) with redundant 700 MHz, 64 M flash and 512 MB RAM SCP-P5-700; *Requires ForeThought 9.1 or greater software |
|
SCP-P5-700-R |
Redundant Pentium 700 MHz Switch Control Processor with 512 MB DRAM and 64 MB Flash, (700 MHz Pentium SCP installed in redundant configuration)*; must be same type as primary SCP in switch module. *Requires ForeThought 9.1 or greater software |
|
SCP-P5-266-HM-400-I |
Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 266 MHz 256 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX1000 factory installed upgrade) |
|
SCP-P5-266-HM-400-HM-I |
Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 266 MHz 256 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX1000 factory installed upgrade) |
|
Network Modules (ASX200, ASX1000, ASX1200, TNX210, TNX1100) |
|
|
Spares and Upgrades |
|
|
CEC-1000-B |
ASX-1000/ASX-1200 Common Equipment Card |
|
CEC-PLUS/CXR |
CEC-Plus Carrier Module |
|
ENCL-1000 |
ASX-1000 Switch Enclosure |
|
ENCL-1100 |
TNX-1100 Switch Enclosure |
|
ENCL-1200 |
ASX-1200 Switch Enclosure |
|
ENCL-200BX/AC |
ASX-200BX Switch Enclosure with 2 AC Power Supplies |
|
ENCL-200BX/DC |
ASX-200BX Switch Enclosure with 2 DC Power Supplies |
|
ENCL-210/AC |
TNX-210 Switch Enclosure with 2 AC Power Supplies |
|
ENCL-210/DC |
TNX-210 Switch Enclosure with 2 DC Power Supplies |
|
FAN-1000 |
ASX-1000/ASX-1200 Fan Tray |
|
FAN-1100 |
TNX-1100 Fan Tray |
|
PS-1000/DC-B |
ASX-1000/ASX-1200 Power Supply – DC |
|
PS-1000/AC-B |
ASX-1000/ASX-1200 Power Supply – AC |
|
PS-1000-INS |
ASX-1000/ASX-1200 Power Supply Insert – AC |
|
PS-200BX/AC-B |
ASX-200BX Power Supply - AC |
|
PS-200BX/DC-B |
ASX-200BX Power Supply – DC |
|
PS-210/AC-B |
TNX-210 Power Supply – AC |
|
PS-210/DC-B |
TNX-210 Power Supply – DC |
|
SCP-P5-200 |
Pentium - 200 MHz Switch Control Processor with 64 MB DRAM and 16 MB flash. (Requires ForeThought 7.0 or greater software, or a software patch to FT6.1.1 or FT6.2.) (available as a spare for ASX200/1000/1200, TNX210/1100) |
|
SCP-P5-200-HM |
Pentium - 200 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash. (Requires ForeThought 7.0 or greater software, or a software patch to FT6.1.1 or FT6.2.) (available as a spare for ASX200/1000/1200, TNX210/1100) |
|
SCP-P5-200-HM-UPG |
SCP-P5-200 256 MB DRAM upgrade, kit includes 256 MB memory, EPROM, chip puller, and instruction manual |
|
SCP-P5-266 |
Pentium 266 MHz Switch Control Processor with 64 MB DRAM and 16 MB flash. (Requires ForeThought 7.0 or greater software, or a software patch to FT6.1.1 or FT6.2.) (available as a spare for ASX200/1000/1200, TNX210/1100) |
|
SCP-P5-266-HM |
Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash. (Requires ForeThought 7.0 or greater software, or a software patch to FT6.1.1 or FT6.2.) (available as a spare for ASX200/1000/1200, TNX210/1100) |
|
SCP-P5-266-HM-UPG |
SCP-P5-266 256 MB DRAM upgrade, kit includes 256 MB memory, EPROM, chip puller, and instruction manual |
|
SCP-P5-400-HM-UPG |
SCP-P5-400 256 MB DRAM upgrade, kit includes 512MB memory, EPROM, chip puller, and instruction manual |
|
SCP-P5-400 |
Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash (Requires ForeThought 8.0 or higher software, or a software patch to FT7.0 or FT7.1) (available as a spare for ASX200, ASX1000, ASX1200, TNX210, TNX1100) |
|
SCP-P5-400-HM |
Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (Requires ForeThought 8.0 or higher software, or a software patch to FT7.0 or FT7.1) (available as a spare for ASX200, ASX1000, ASX1200, TNX210, TNX1100) |
|
SCP-P5-700 |
Pentium 700 MHz Switch Control Processor with 512 MB DRAM and 64 MB Flash (Requires ForeThought 9.1 or higher) (available as a spare for ASX200, ASX1000, ASX1200, TNX210, TNX1100) |
|
SM-1000 |
ASX-1000 Switch Module (SCP not included) |
|
SM-1100 |
TNX-1100 Switch Module (SCPs not included) For installed base hardware purchases prior to Forethought 6.0 |
|
SM-1100-B |
TNX-1100 High Performance Switch Module (SCPs not included) (ForeThought 6.0 or Greater Required) |
|
SM-1100-C |
High Performance OAM ready Switch Module for TNX-1100 |
|
SM-1200 |
ASX-1200 Switch Module (SCP not included) (ForeThought 6.0 or Greater Required) |
|
SM-200BX |
ASX-200BX Switch Module (SCP not included) |
|
SM-210 |
TNX-210 Switch Module (SCP not included) |
|
TCM/DS1-3 |
Timing control module with stratum-3 DS1 interface (available for ASX1200/TNX1100) |
|
TCM/DS1-4 |
Timing control module with stratum-4 DS1 interface (available for ASX1200/TNX1100) |
|
TCM/E1-3 |
Timing control module with stratum-3 E1 interface (available for ASX1200/TNX1100) |
|
TCM/E1-4 |
Timing control module with stratum-4 E1 interface (available for ASX1200/TNX1100) |
|
|
|
|
Accessories |
|
|
CMT-19 |
19” Cable Management Tray |
|
CMT-23 |
23” Cable Management Tray |
|
MM-SOFF-RMB23 |
23" MID MOUNT Bracket kit |
|
RMB23-14UI |
23” Rack Mounting Brackets (1 pair) |
|
KIT0035-01 |
ASX200BX Mounting Bracket Kit |
|
|
|
|
Series D Network Modules |
|
|
NM-4/DS1D |
4 port DS1 network module |
|
NM-4/E1D |
4 port E1 network module |
|
|
*Note: Series D network modules require ForeThought 5.0 for ASX-200BX and ASX-1000 platforms. |
|
Series E Network Modules |
|
|
NM-4/E3E |
Four port E3, BNC connector |
|
NM-4/DS3E |
Four port DS3, BNC connector |
|
NM-4/155UTPE |
Four port OC-3c, UTP, RJ-45 connector |
|
NM-4/155MMSCE |
Four port OC-3c, MM, SC connector |
|
NM-4/155MMSTE |
Four port OC-3c, MM, ST connector |
|
NM-4/155LR3MME |
Single port SMLR (1550nm) and three port MM OC-3c, SC connector |
|
NM-4/155IR3MME |
Single port SMIR and three port MM OC-3c, SC connector |
|
NM-4/155SMIRE |
Four port OC-3c, SMIR, SC connector |
|
NM-4/155SMLRE |
Four port OC-3c, SMLR (1550nm), SC connector |
|
NM-1/622MMSCE |
Single port OC-12c, MM, SC connector |
|
NM-1/622SMIRE |
Single port OC-12c, SMIR, SC connector |
|
NM-1/622SMLRE |
Single port OC-12c, SMLR (1550nm), SC connector |
|
NM-4/155STM1EE |
Four port STM1e, BNC Connector |
|
|
*Note: Series E network modules require ForeThought 6.2 |
|
Ethernet Network Modules |
|
|
NM-4/ETH-TXB |
4 port 10/100 IP capable Ethernet Network Module for ASX-200BX, ASX-1000, ASX-1200, TNX-210 and TNX-1100 |
|
NM-1/ETH-1000GBIC-SX |
One port Gigabit Ethernet network module with 500M reach, multimode GBIC interface for ASX-200BX, ASX-1000, ASX-1200, TNX-210, TNX-1100 and ASX-4000 or ASX-4000M with NMCC |
|
NM-1/ETH-1000GBIC-LX |
One port Gigabit Ethernet network module with up to 10KM single mode intermediate reach GBIC interface for ASX-200BX, ASX-1000, ASX-1200, TNX-210, TNX-1100 and ASX-4000 or ASX-4000M with NMCC |
|
NM-1/ETH-1000GBIC |
One port Gigabit Ethernet network module with no GBIC interface for ASX-200BX, ASX-1000, ASX-1200, TNX-210, TNX-1100 and ASX-4000 or ASX-4000M with NMCC |
|
NM-GBIC-SX |
500M multimode GBIC interface |
|
NM-GBIC-LX |
10KM Single mode intermediate reach GBIC interface |
|
NM-LANESVR |
LANE v1.0 Services Network Module |
|
|
|
|
OC-48c Network Modules |
|
|
NM-1/2488SMSR |
1 port, 2488 Mbps single mode, short reach fiber, SC connector, with integrated switch fabric |
|
NM-1/2488SMLR |
1 port, 2488 Mbps single mode, long reach fiber, SC connector, with integrated switch fabric |
|
Circuit Emulation Network Modules |
|
|
NMCE-3/DS3 |
3-port channelized DS3 3/1/0 Circuit Emulation Service network module (8.2) |
|
NMCE-1/155SMIRE |
One port channelized OC3 CEM network module (SMIR) (FT 8.3.1) |
|
NMCE-1/155MME |
One port channelized OC3 CEM network module (MM) (FT 8.3.1) |
|
NMCE-8/DS1E1E |
8 port T1 1.544 Mbps and E1 2.048 Mbps Circuit Emulation module (8.1) |
|
CBL-LC-SC/MM-5 |
LC to SC Connector, multimode Fiber, 5M |
|
CBL-LC-SC/SM-5 |
LC to SC Connector, single mode Fiber, 5M |
|
Frame Relay Interworking Network Modules |
|
|
NMFR-4/DS1A |
4 port DS1 1.544 Mbps Frame Interworking (5.2) |
|
NMFR-4/E1A |
4 port E1 2.048 Mbps Frame Interworking (5.2) |
|
NMFR-3/DS3 |
3-port channelized DS3 3/1/0 Frame Relay Interworking network module (8.2) |
|
ASX/TNX Frame Relay Application Software (One-Time RTU License Fee) |
|
|
MLFR-RTU/DS3 |
Multi-Link Frame Relay RTU Software (for 3-port channelized DS3 3/1/0 Frame Relay network module - NMFR-3/DS3) (per FR NM) (8.3) |
|
T1/E1 to V.35 converter |
|
|
|
V.35 converter with network crossover cable, control port cable, user manual, power supply and optional pigtail for interconnect with Cisco routers. Used with NMCE-6/DS1/A & NMFR-4/DS1A. |
|
V35-T1-FT1-KIT |
T1/FT1 to V.35 converter |
|
V35-E1-FE1-KIT |
E1/FE1 to V.35 converter |
|
V35-T1-FT1-C-KIT |
T1/FT1 to V.35 converter incl. DB-60 Pigtail for interconnect with Cisco Routers |
|
V35-E1-FE1-C-KIT |
E1/FE1 to V.35 converter incl. DB-60 Pigtail for interconnect with Cisco Routers |
|
IMA Network Modules |
|
|
NMIMA-8/DS1D |
8 port Universal DS1 IMA & ATM network modules |
|
NMIMA-8/E1D |
8 port Universal E1 IMA & ATM network modules |
|
NMIMA-3/DS3 |
3-port channelized DS3 3/1 IMA & ATM network module (8.3) |
|
NMIMA-1/155SFPE |
1+1 Channelized OC-3/STM-1 IMA network module with multimode or single mode intermediate reach pluggable optics for ASX200BX, ASX1000, ASX1200, TNX210, TNX1100 and ASX4000/M. |
|
SFP-155MM1 |
OC-3c/STM-1 Small Form-factor Pluggable, Multimode Fiber, Short Reach - 1310nm, LC Connector |
|
SFP-155IR1 |
OC-3c/STM-1 Small Form-factor Pluggable, Single Mode Fiber, Intermediate Reach - 1310nm, LC Connector |
|
Serial Network Modules |
|
|
NMCE-4/SR24 |
4-port serial network module |
|
|
|
|
ASX-4000 Backbone ATM Switch |
|
|
Includes: |
One 14 slot chassis with one integrated power supply shelf, 10, 20, 30, or 40 Gbps non-blocking ATM switching module via 1-4 switch modules, 1-8 port card slots, 2 enabled per switch fabric, 4 AC or 5 DC power supplies, load-sharing, 1:N redundancy - AC power cables if applicable, Redundant Fan Trays, Filter Tray with Filter, AC Version: One Pentium III switch control processor (512 MB DRAM) - single SCP controls entire switch, DC version: One Pentium III switch control processor (1024 MB DRAM) - single SCP controls entire switch, Rack-mount shelf (must choose one from below) , Manuals on CD media |
|
ASX-4000/AC Base Configurations |
|
|
ASX-4000/10AC |
ASX-4000 10 Gbps ATM Backbone Switch |
|
ASX-4000/20AC |
ASX-4000 20 Gbps ATM Backbone Switch |
|
ASX-4000/30AC |
ASX-4000 30 Gbps ATM Backbone Switch |
|
ASX-4000/40AC |
ASX-4000 40 Gbps ATM Backbone Switch |
|
ASX-4000/DC Base Configurations |
|
|
ASX-4000/10DC |
ASX-4000 10 Gbps ATM Backbone Switch |
|
ASX-4000/20DC |
ASX-4000 20 Gbps ATM Backbone Switch |
|
ASX-4000/30DC |
ASX-4000 30 Gbps ATM Backbone Switch |
|
ASX-4000/40DC |
ASX-4000 40 Gbps ATM Backbone Switch |
|
ASX-4000M Base Configurations |
|
|
ASX-4000M/10DC |
ASX-4000M 10 Gbps ATM Backbone Switch |
|
ASX-4000M/20DC |
ASX-4000M 20 Gbps ATM Backbone Switch |
|
ASX-4000M/30DC |
ASX-4000M 30 Gbps ATM Backbone Switch |
|
ASX-4000M/40DC |
ASX-4000M 40 Gbps ATM Backbone Switch |
|
ASX-4000 Required Shelf Options (must choose one) |
|
|
SHELF-4000/19-I |
19” Cabinet Shelf Assembly (Corner-mount)* |
|
SHELF-4000/19MM-I |
19” Relay Rack Shelf Assembly (Mid-mount) |
|
SHELF-4000/23-I |
23” Cabinet Shelf Assembly (Corner-mount)* |
|
SHELF-4000/23MM-I |
23” Relay Rack Shelf Assembly (Mid-mount) |
|
|
* Cabinet must be between 24-36” deep |
|
ASX-4000M Required Shelf Options (must choose one) |
|
|
SHELF-4000M/23MM-I |
23” Relay Rack Shelf Assembly (Mid-mount) |
|
|
|
|
ASX-4000/AC Hardware Options |
|
|
SCP-4000-P3-512-DS1-I-AC |
Factory installed Pentium 3 switch control processor with DS1 BITS timing in place of base Pentium II. Requires FT 7.1 or higher. |
|
SCP-4000-P3-512-E1-I-AC |
Factory installed Pentium 3 switch control processor with E1 BITS timing in place of base Pentium II. Requires FT 7.1 or higher. |
|
SCP-4000-P3-512-T-R-AC |
Redundant Pentium 3 switch control processor (without BITS timing); must be same type as primary SCP. Requires FT 7.1 or higher. Not field upgradeable to DS-1 or E1 BITS timing capability. |
|
SCP-4000-P3-512-DS1-R-AC |
Redundant Pentium 3 switch control processor with DS1 BITS timing; must be same type as primary SCP. Requires FT 7.1 or higher. |
|
SCP-4000-P3-512-E1-R-AC |
Redundant Pentium 3 switch control processor with E1 BITS timing; must be same type as primary SCP. Requires FT 7.1 or higher. |
|
SCP-4000-P3-1024-T-I-AC |
Factory installed Pentium 3 switch control processor (without BITS timing) in place of base Pentium II. Requires FT 8.0 or higher. Not field upgradeable to DS-1 or E1 BITS timing capability. |
|
SCP-4000-P3-1024-DS1-I-AC |
Factory installed Pentium 3 switch control processor with DS1 BITS timing in place of base Pentium II. Requires FT 8.0 or higher. |
|
SCP-4000-P3-1024-E1-I-AC |
Factory installed Pentium 3 switch control processor with E1 BITS timing in place of base Pentium II. Requires FT 8.0 or higher. |
|
SCP-4000-P3-1024-T-R-AC |
Redundant Pentium 3 switch control processor (without BITS timing); must be same type as primary SCP. Requires FT 8.0 or higher. Not field upgradeable to DS-1 or E1 BITS timing capability. |
|
SCP-4000-P3-1024-DS1-R-AC |
Redundant Pentium 3 switch control processor with DS1 BITS timing; must be same type as primary SCP. Requires FT 8.0 or higher. |
|
SCP-4000-P3-1024-E1-R-AC |
Redundant Pentium 3 switch control processor with E1 BITS timing; must be same type as primary SCP. Requires FT 8.0 or higher. |
|
ASX-4000 and ASX-4000M/DC Hardware Options |
|
|
SCP-4000-P3-512-DS1-I-DC |
Factory installed Pentium 3 switch control processor with DS1 BITS timing in place of SCP without BITS timing. Requires FT 7.1 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-512-E1-I-DC |
Factory installed Pentium 3 switch control processor with E1 BITS timing in place of SCP without BITS timing. Requires FT 7.1 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-512-T-R-DC |
Redundant Pentium 3 switch control processor (without BITS timing); must be same type as primary SCP. Not field upgradeable to DS-1 or E1 BITS timing capability.Requires FT7.1 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-512-DS1-R-DC |
Redundant Pentium 3 switch control processor with DS1 BITS timing; must be same type as primary SCP. Requires FT 7.1 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-512-E1-R-DC |
Redundant Pentium 3 switch control processor with E1 BITS timing; must be same type as primary SCP. Requires FT 7.1 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-1024-DS1-I-DC |
Factory installed Pentium 3 switch control processor with DS1 BITS timing in place of SCP without BITS timing. Requires FT 8.0 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-1024-E1-I-DC |
Factory installed Pentium 3 switch control processor with E1 BITS timing in place of SCP without BITS timing. Requires FT 8.0 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-1024-T-R-DC |
Redundant Pentium 3 switch control processor (without BITS timing); must be same type as primary SCP. Not field upgradeable to DS-1 or E1 BITS timing capability. Requires FT8.0 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-1024-DS1-R-DC |
Redundant Pentium 3 switch control processor with DS1 BITS timing; must be same type as primary SCP. Requires FT 8.0 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-1024-E1-R-DC |
Redundant Pentium 3 switch control processor with E1 BITS timing; must be same type as primary SCP. Requires FT 8.0 or higher for ASX-4000. Requires FT8.1 or higher for ASX-4000M. |
|
|
|
|
ASX-4000 Series 1 Port Cards |
|
|
PC-20/622X155MM1 |
4 port, 622 Mbps OC-12c/STM-4c and 16 port, 155 Mbps OC-3c/STM-1 port card, multimode fiber,SC and MT-RJ connector |
|
PC-20/622SMIRX155MM1 |
4 port, 622 Mbps OC-12c/STM-4c, SMF intermediate reach, SC connector, 16 port, 155Mbps OC-3c/STM-1, MMF MT-RJ connector |
|
PC-20/622X155SMIR1 |
4 port, 622 Mbps OC-12c/ATM-4c and 16 port, 155 Mbps OC-3c/STM-1 port card, single mode fiber, intermediate reach,SC and MT-RJ connector |
|
PC-8/622MMSC1 |
8 port, 622 Mbps OC-12c/STM-4c port card, multimode fiber, SC connector |
|
PC-8/622SMIRSC1 |
8 port, 622 Mbps OC-12c/STM-4c port card, single mode fiber, intermediate reach, SC connector |
|
PC-2/2488SMSR1 |
2 port, 2488 Mbps OC-48c/STM-16c port card, single mode fiber, short reach, SC connector |
|
PC-2/2488SMSR1-PM |
2-port, 2488 Mbps OC-48c/STM-16c port card with port monitoring, single mode fiber, short reach, SC connector |
|
PC-2/2488SMLRSC1 |
2 port, 2488 Mbps OC-48c/STM-16c port card, single mode fiber, long reach, SC connector |
|
ASX-4000M Series 1 Port Cards |
|
|
PC-2/2488SMSR1 |
2 port, 2488 Mbps OC-48c/STM-16c port card, single mode fiber, short reach, SC connector |
|
PC-2/2488SMSR1-PM |
2-port, 2488 Mbps OC-48c/STM-16c port card with port monitoring, single mode fiber, short reach, SC connector |
|
PC-2/2488SMLRSC1 |
2 port, 2488 Mbps OC-48c/STM-16c port card, single mode fiber, long reach, SC connector |
|
ASX-4000/ASX-4000M Series 2 Port Cards |
|
|
PC-28/155MM2 |
28 port, 155Mbps OC-3c/STM-1 port card, multimode fiber, intermediate reach, MT-RJ connector |
|
PC-28/155SMIR2 |
28 port, 155Mbps OC-3c/STM-1 port card, single mode fiber, MT-RJ connector |
|
PC-8/622MM2 |
8-port, 622 Mbps OC-12c/STM-4c port card, multimode fiber, SC connector |
|
PC-8/622SMIR2 |
8-port, 622 Mbps OC-12c/STM-4c port card, single mode fiber, intermediate reach, SC connector |
|
PC-8/622SMLR2 |
8-port, 622 Mbps OC-12c/STM-4c port card, single mode fiber, 1550 long reach, SC connector |
|
PC-4/CH622DS3SMIR2 |
4-port, channelized 622 Mbps OC-12/STM-4(12 DS3 channels per port) port card, single mode fiber, intermediate reach, SC connector |
|
PC-20/622x155SMIR2 |
4 ports, 622 Mbps OC12c/STM4c and 16 ports OC3c/STM1c port card, single mode intermediate reach fiber, SC (OC12c) and MT-RJ (OC3c) connectors. |
|
PC-2/CH155IMASMIR2 |
2 port, channelized 155 Mbps OC3/STM1 (84 DS1 channels per port or 63 E1 channelis per port) port card, single mode fiber, intermediate reach, SC connector |
|
PC-4/CH155CEMSMIR2 |
4 port, channelized 155 Mbps OC3/STM1 CEM (84 DS1 channels per port or 63 E1 channels per port) port card, single mode fiber, intermediate reach, SC connector. |
|
ASX-4000/ASX-4000M POS/Fast Port Cards |
|
|
PC-6/POS155MM |
6-port, 155 Mbps OC-3c/STM-1 FAST/POS port card, multimode fiber, SC connector. For ASX-4000M, please call factory for availability. |
|
PC-6/POS155SMLR |
6-port, 155 Mbps OC-3c/STM-1 FAST/POS port card, single mode fiber, long range, SC connector. For ASX-4000M, please call factory for availability. |
|
PC-6/POS622MM |
6-port, 622 Mbps OC-12c/STM-4c FAST/POS port card, multimode fiber, SC connector. For ASX-4000M, please call factory for availability. |
|
PC-6/POS622SMLR |
6-port, 622 Mbps OC-12c/STM-4c FAST/POS port card, single mode fiber, long range, SC connector. For ASX-4000M, please call factory for availability. |
|
PC-0/4976IPR |
0-port, 4976 Mbps IP routing and forwarding port card. For ASX-4000M, please call factory for availability. |
|
PC-2/POS2488SMSR |
2-port, 2488 Mbps OC-48c/STM-16c POS port card, single mode fiber, short reach, SC connector. For ASX-4000M, please call factory for availability. |
|
|
|
|
ASX-4000/ASX-4000M Netmod Carrier Card |
|
|
PC-4000NMC |
Network Module Carrier Card (NMC) |
|
ASX-4000/ASX-4000M Network Modules for Netmod Carrier Card |
|
|
Series E Network Modules |
|
|
NM-4/DS3E |
Four port DS3, BNC connector. Supported in ASX-4000/ASX-4000M via NMC (FT 8.2) |
|
NM-4/E3E |
Four port E3, BNC connector. Supported in ASX-4000/ASX-4000M via NMC (FT 8.3.1) |
|
NM-4/155SMIRE |
Four port OC-3c, SMIR, SC connector. Supported in ASX-4000/ASX-4000M via NMC (FT 8.2) |
|
NM-4/155MMSCE |
Four port OC-3c, MM, SC connector. Supported in ASX-4000/ASX-4000M via NMC(FT 8.2) |
|
NM-4/155SMLRE |
Four port OC-3c, SMLR (1550nm), SC connector. Supported in ASX-4000/ASX-4000M via NMC (FT 8.2) |
|
NM-4/155MMSTE |
Four port OC-3c, MM, ST connector. Supported in ASX-4000/ASX-4000M via NMC (FT 8.2) |
|
NM-4/155LR3MME |
Single port SMLR (1550nm) and three port MM OC-3c, SC connector. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.2) |
|
NM-4/155IR3MME |
Single port SMIR and three port MM OC-3c, SC connector. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.2) |
|
NM-4/155UTPE |
Four port OC-3c, UTP, RJ-45 connector. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.3) |
|
NM-1/622SMIRE |
Single port OC-12c, SMIR, SC connector. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.2) |
|
NM-1/622MMSCE |
Single port OC-12c, MM, SC connector. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.2) |
|
NM-1/622SMLRE |
Single port OC-12c, SMLR (1550nm), SC connector. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.2) |
|
IMA Network Modules |
|
|
NMIMA-8/DS1D |
8 port Universal DS1 IMA network modules. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.2) |
|
NMIMA-8/E1D |
8 port Universal E1 IMA & ATM network modules. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.3) |
|
NMIMA-3/DS3 |
3-port channelized DS3 3/1 IMA & ATM network module (8.3). Supported in ASX-4000/ASX-4000M via NMC. (FT 8.3) |
|
Circuit Emulation Network Modules |
|
|
NMCE-3/DS3 |
3-port channelized DS3 3/1/0 Circuit Emulation Service network module. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.2) |
|
Frame Relay Interworking Network Modules |
|
|
NMFR-4/DS1A |
4 port DS1 1.544 Mbps Frame Interworking. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.3) |
|
NMFR-4/E1A |
4 port E1 2.048 Mbps Frame Interworking. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.3) |
|
NMFR-3/DS3 |
3-port channelized DS3 3/1/0 Frame Relay Interworking network module. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.2) |
|
ASX/TNX Frame Relay Application Software (One-Time RTU License Fee) |
|
|
MLFR-RTU/DS3 |
Multi-Link Frame Relay RTU Software (for 3-port channelized DS3 3/1/0 Frame Relay network module - NMFR-3/DS3) (per FR NM) (8.3) |
|
Ethernet Network Modules |
|
|
NM-4/ETH-TXB |
4 port 10/100 IP capable Ethernet Network Module. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.3) |
|
NM-1/ETH-1000GBIC-SX |
One port Gigabit Ethernet network module with 500M reach, multimode GBIC interface. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.3) |
|
NM-1/ETH-1000GBIC-LX |
One port Gigabit Ethernet network module with up to 10KM single mode intermediate reach GBIC interface. Supported in ASX-4000/ASX-4000M via NMC. (FT 8.3) |
|
NM-1/ETH-1000GBIC |
One port Gigabit Ethernet network module with no GBIC interface . Supported in ASX-4000/ASX-4000M via NMC. (FT 8.3) |
|
|
|
|
ASX-4000 Spares & Accessories |
|
|
CMS-4000A |
ASX-4000 Cable Management System; Includes: Two port card doors and four cable channels |
|
SM-4000 |
ASX-4000 Switch Module |
|
SCP-4000-P3-512-T |
ASX-4000 Pentium 3 512 MB switch control processor (without BITS timing). Requires FT 7.1 or higher. Not field upgradeable to DS-1 or E1 BITS timing capability. |
|
SCP-4000-P3-512-DS1 |
ASX-4000 Pentium 3 512 MB switch control processor with DS1 BITS timing. Requires FT 7.1 or higher. |
|
SCP-4000-P3-512-E1 |
ASX-4000 Pentium 3 512 MB switch control processor with E1 BITS timing. Requires FT 7.1 or higher. |
|
SCP-4000-P3-1024-T |
ASX-4000 Pentium 3 1024 MB switch control processor (without BITS timing). Not field upgradeable to DS-1 or E1 BITS timing capability. Requires FT 8.0 or higher. |
|
SCP-4000-P3-1024-DS1 |
ASX-4000 Pentium 3 1024 MB switch control processor with DS1 BITS timing. Requires FT 8.0 or higher. |
|
SCP-4000-P3-1024-E1 |
ASX-4000 Pentium 3 1024 MB switch control processor with E1 BITS timing. Requires FT 8.0 or higher. |
|
PS-4000/AC |
ASX-4000 Power Supply – AC |
|
PS-4000/DC |
ASX-4000 Power Supply – DC |
|
ENCL-4000/AC |
ASX-4000 Switch Enclosure – AC (Chassis only) |
|
ENCL-4000/DC |
ASX-4000 Switch Enclosure – DC (Chassis only) |
|
Call factory for reference |
ASX-4000 DC Breaker Interface Panel |
|
FAN-4000 |
ASX-4000 Fan Tray |
|
FILTERTRAY-4000 |
ASX-4000 Filter Tray |
|
FILTER-4000 |
ASX-4000 Filter |
|
SHELF-4000/19 |
ASX-4000 19” Cabinet Shelf Assembly (Corner-mount)* |
|
SHELF-4000/19MM |
ASX-4000 19” Relay Rack Shelf Assembly (Mid-mount) |
|
SHELF-4000/23 |
ASX-4000 23” Cabinet Shelf Assembly (Corner-mount)* |
|
SHELF-4000/23MM |
ASX-4000 23” Relay Rack Shelf Assembly (Mid-mount) |
|
FP-4000-PC-SM |
ASX-4000 port card switch module faceplate |
|
FP-4000-SCP |
ASX-4000 SCP faceplate |
|
MTRJ-SC/MM |
MT-RJ to SC connector, multimode fiber cable, 4 meters |
|
MTRJ-SC/SM |
MT-RJ to SC connector, single mode fiber cable, 4 meters |
|
Connector Patch Panel |
Connector Patch Panel |
|
HWKT0282-0001 |
TIM kit to provide BITS input connectors for pre-CY2000 ASX-4000 switches |
|
|
|
|
ASX-4000M Spares & Accessories |
|
|
CMS-4000M |
ASX-4000M Cable Management System |
|
SM-4000 |
ASX-4000 Switch Module |
|
SCP-4000-P3-512-T |
ASX-4000 Pentium 3 512 MB switch control processor (without BITS timing). Not field upgradeable to DS-1 or E1 BITS timing capability. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-512-DS1 |
ASX-4000 Pentium 3 512 MB switch control processor with DS1 BITS timing. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-512-E1 |
ASX-4000 Pentium 3 512 MB switch control processor with E1 BITS timing. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-1024-T |
ASX-4000 Pentium 3 1024 MB switch control processor (without BITS timing). Not field upgradeable to DS-1 or E1 BITS timing capability. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-1024-DS1 |
ASX-4000 Pentium 3 1024 MB switch control processor with DS1 BITS timing. Requires FT8.1 or higher for ASX-4000M. |
|
SCP-4000-P3-1024-E1 |
ASX-4000 Pentium 3 1024 MB switch control processor with E1 BITS timing. Requires FT8.1 or higher for ASX-4000M. |
|
PS-4000M/DC |
ASX-4000M - DC Power Supply |
|
ENCL-4000M/DC |
ASX-4000M Switch Enclosure - DC (Chassis only) |
|
FAN-4000M |
ASX-4000M Fan Tray |
|
FILTER-4000M |
ASX-4000M Filter |
|
SHELF-4000M/23MM |
ASX-4000M 23" Relay Rack Shelf Assembly (Mid-mount) |